Archive
2020, Volume 4
2019, Volume 3
2018, Volume 2
2017, Volume 1




Volume 3, Issue 2, December 2019, Page: 27-31
Causes and Countermeasures of Strong Vibration of Pipe End Thickener
Liu Tongyi, School of Mechanical Engineering, Shandong University of Technology, Zibo, China
Received: Apr. 4, 2019;       Accepted: Jan. 3, 2020;       Published: Jan. 13, 2020
DOI: 10.11648/j.ie.20190302.12      View  381      Downloads  80
Abstract
The pipe end thickening machine is a pressure processing equipment for thickening the pipe end of plastic material. The process of thickening the tubing end is to heat one end of the tubing to a certain temperature, push it into the die hall, and close the die cylinder under the push of hydraulic oil to press the end of the pipe. Then, squeeze into the cylinder forward, and the extrusion head on the piston rod thickens the end of the pipe. Complete the thickening process at the end of the pipe. In the production process, due to the great pressure change of the hydraulic system, the vibration of the system is violent, resulting in pipeline cracking, which seriously affects the production. Through the analysis of hydraulic system of pipe end thickener, it is found that the fundamental cause of the system pressure relief vibration is that when the hydraulic system is unloading, the volume of the hydraulic cylinder unloading cavity is large and the energy is accumulated. The problem can be solved by adjusting the section where the actual stroke of the hydraulic cylinder is located in the total stroke to reduce the volume of the pressure relief chamber and the energy released when the pressure is unloaded.
Keywords
Hydraulic System, Vibration Pressure, Release
To cite this article
Liu Tongyi, Causes and Countermeasures of Strong Vibration of Pipe End Thickener, Industrial Engineering. Vol. 3, No. 2, 2019, pp. 27-31. doi: 10.11648/j.ie.20190302.12
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Liu Shimei, Tan Jianping, Chen Hui, 300MN die forging hydraulic press hydraulic pressure system fault simulation study [J]. Forging Technology, 2011, 36 (2) 59/63.
[2]
Yang Guichuan, Yu Jiang, Chen Wen, and so on. Study on the working pressure and working cylinder arrangement of large-scale die-forging hydraulic press [J]. Forging Technology, 2011, 36 (3) 77-79.
[3]
Yang Guchuan, Yu Jiang, Chen Wen, et al. Study on frame structure of large die forging hydraulic press [J]. Forging Technology, 2010, 35 (3) 109/112.
[4]
He Yanzhong, Chen Wenjia, Huang Jianmin, et al. Design of a new type of travel adjustment mechanism for press [J]. Forging Technology, 2010, 35 (3) 118/121.
[5]
Yan Qingsong, Zhang tie, Tong Lei. QA35Y-30 hydraulic combined punching and shearing machine body improvement [J]. Forging Technology, 2010, 35 (4) 72/76.
[6]
Han Yukun, Zhang Yunzhen, Wang Lixin, et al. Research on impact dynamic characteristics of 20 MN fast forging hydraulic press [J]. Forging Technology, 2010, 35 (4) 95/98.
[7]
Duan Jun, Huang Minghui, Zhanlihua, etc. Research on synchronous balancing system of hydraulic press using PLC and PID [J]. Forging Technology, 2010, 35 (1) 77/80.
[8]
Ruan Wei Ping, he Shi Zhen, Wang Enfu. Design analysis and application of hydraulic overload protection device for press [J]. Forging Technology, 2010, 35 (1) 81-83.
[9]
Yao Chengyu, Zhao Jingyi, Yang Chenggang. Trouble Analysis and treatment of hydraulic Pneumatic system [M]. Beijing: chemical Industry Press 2009. 12.
[10]
Fang Qing. Analysis of pressure-relief performance of CF-type liquid-filling valve [J]. Machine Tools & Hydraulic, 1998. 2.
[11]
Zhang Dapeng, Wu patriotic, du Chunyan, et al. Development of control system for 63 MN forging hydraulic press [J]. Forging Technology, 2009, 34 (6) 109-111.
[12]
Li Xinde. Hydraulic system fault diagnosis and maintenance technical manual. Beijing: China Electric Power Publishing House, 2009. 8.
[13]
Shen Deliang. Causes and Countermeasures of Pipe burst in Marine hydraulic Piping. [J] Shipbuilding Technology, 1994. 10.
[14]
Wisdom. Hydraulic system principle and common fault analysis of high pressure and large flow hydraulic press [J]. Machine tools and hydraulic pressure, 2017. 1.
[15]
Wu Bingsheng, Mu Yinbing. Vibration diagnosis of hydraulic system of rolling mill [J]. Hydraulic and Pneumatic, 2014 (1): 128-130.
Browse journals by subject